Sortware 2 - Basics

• Sortware Workspace

Sortware Workspace

1. Open a Workspace configuration
2. In the top left menu area of the Sortware go to Open > Workspace
3. In the Open Workspace pop-up window, select the folder BB Sorts, and then scroll down to a Workspace named BB-SORTS-2L-86um-15p0psi.wsp
4. The naming convention signifies that this setup is for
   1. 2L Two Lasers (488 and 457)
   2. An 86um Nozzle
   3. A sheath PSI of 15.0
5. Give the Workspace a few seconds to load.

   Workspace Failed to Load

   Occasionally the Workspace will fail to load.

   • The first time this happens, simple click “Okay” and re-open the workspace as before.
   • If it fails again, use the Cytometer drop-down menu to ensure that the InFlux is connected via the Dell and Router.
     • The Dropdown menu item Disconnect From Cytometer should not be greyed out
   • Cytometer not connected? See the previous note on failed connections, or go to Network Troubleshooting.
6. Under the Acquisition Dashboard, click Acquire to initiate data transfer to Sortware